Call Us Today! 208.827.6322 -or- 208.827.6813

Leather is our Passion and Quality is our Commitment!

Saddles

These galleries are intended to give you an idea of saddle styles, features and cost, so that you can more easily decide on what you need in your custom order saddle.

Standard Mule Saddle - our most popular custom item and a great value!

Our mule saddles have wood and rawhide covered trees with actual mule bars. These saddles are also offered with horse bars to meet you and your animals’ needs.

The mule bars have less rock front to back to allow for most mule’s straighter top line. Typically, not always, a tree with horse bars on a mule’s back can be pushed down on front or back of saddle and the end with no pressure will rock up like a rocking chair. When you cinch down the front of the saddle then sit towards back of animal pushing the back of the saddle down, it causes great lifting pressure on the front cinch. This is highly uncomfortable for your mule and can cause physical damage to the mules back as well as bad behavior because of pain.

Our base price mule saddles come standard with a Wade or slick fork tree. These can be built with a swell fork tree,  i.e. Will James, Association or Low Moose to name a few, at an additional charge of $100 to cover the extra labor involved in covering swells.

The standard mule saddle comes with a 3″x3″ post horn; others can be requested at a slight fee. Cantle is finished with a top binding or “pencil roll”. The standard height is slightly over 4 inches. The saddle come with 2 sets of breast collar dees, a lower set for traditional breast collars and a higher set for Martingale style pulling collars. Rings are installed by screws into the tree for britchen and crupper. These saddles have a double dee rigging that is cut and designed for ease of forward leg movement. The rigging is rawhide wrapped and leather bound on both front and back dees to insure extra strength and durability.

Saddle comes with your choice of 3″ rear cinch and 2″ rear billets all lined and stitched or installation of rear latigos and latigo keepers. Saddle comes with 3″ stirrup leathers twisted and wrapped to ensure staying twisted and to easy knee stress. Standard stirrups are 2 1/2″ Visalias wood and galvanized metal bound with leather foot treads. Stirrup leathers also have Blevins Quick Change buckles installed. Front latigo and off billet comes installed. Skirts are round with real sheepskin lining. We use Herman Oak or Wickett and Craig skirting leather, both American companies. The standard hardware is stainless steel. Saddle also comes with a double cut boarder outline included in price.

Base price for the Standard Mule Saddle series saddle is $2850.

We do offer to send out bare trees to ensure fit. There is a nominal fee associated with this service, please contact us for more information.

Rear latigos and latigo keepers installed.

Matching pulling collar and rolled-edged britchen can be added for an additional $320

Ranch Cutter

  • Buster Welsh tree
  • Semi-cutter horn; 3 1/2″ tall with 1  3/4 cap tipped forward and latigo wrapped.
  • 3 1/2″ cantle with regular top bind cantle binding.
  • 7/8 flatplate double rigging with 3″ rear cinch and 2″ rear billets, lined and stitched.
  • High and low breast collar Ds in rigging. Semi-square skirts cut out under leg for closer contact ride.

This saddle shown with exposed stirrup leathers, 3/4 leather covered stirrups, partial large basket stamp and extended border stamping.

  • Base price for saddle $3925
  • Price for saddle as shown $5010

Packer Series 1

Horse or mule bars. Standard Packer saddles comes with mule hide wrapped 3×3 inch post horn as well as our rawhide lined double dee rigging with breast collar dees and leg relief cut for forward movement.

Saddle has crupper and britchen dees with an extra set of high breast collar dees for Martingale style breast collar or pulling collar. Front latigo and off billet installed.

Comes with lined and stitched 3 inch rear cinch and 2 inch rear billets or rear latigos for your mule if you prefer.

Standard stirrups are 2 1/2 inch hardwood and galvanized lined Visalia with leather treads installed. 3 inch stirrup leathers with the Hamley twist installed to keep leathers turned with Blevins quick change buckles. Rings laced into 1/2″ latigo strings for easy attachment of saddle bags , cantle bags or what have you.

Round skirts lined with real sheepskin. These saddles normally run between 31 to 34 pounds depending on seat size.

Base price for the Packer series saddle is $2850.

Packer Series 2

All standard Packer Series saddle features with some added extra to set it apart. Rough out seat housing and fenders with exposed stirrup leathers are no extra charge.

  • Base price for saddle $2850
  • Partial basket stamped $425
  • Double Starburst border $395
  • Nickle plated 3" Monell stirrups with 3/4 covers stamped to match $250
  • Total price for saddle as shown $3920

Packer Series 3

All the standard Packer Series saddle features with some other options.

  • Base price for saddle $2850
  • Inlaid padded seat $185
  • Four point star with sunburst border stamp $585
  • Partial basket stamped $200
  • Total price for saddle as shown $3820

Trail/Competition Saddle 1

  • In-skirt double rigging with lined 2 1/2″ rear cinch and 2″rear billets.
  • Round skirts lined with real wool.
  • 2 1/2″ stirrup leathers with permanent twist and Blevins quick change buckles.
  • Stainless steel hardware.
  • Leather-treaded 2 1/2″ galvanized wrapped hardwood Visalia stirrups.
  • Front latigo and off billet included.

Depending on seat size saddle weights 26 to 30 pounds.

  • Base price for saddle $2950
  • Double Starburst border $395
  • Total price for saddle as shown $3345

Trail/Competition Saddle 2

  • Two-tones, light weight.
  • In-skirt double rigging with lined 2 1/2″ rear cinch and 2″rear billets.
  • Round skirts lined with real wool.
  • 2 1/2″ stirrup leathers with permanent twist and Blevins quick change buckles.
  • Stainless steel hardware.
  • Leather-treaded 2 1/2″ galvanized wrapped hardwood Visalia stirrups.
  • Front latigo and off billet included.

Depending on seat size saddle weights 26 to 30 pounds.

  • Base price for saddle $2950
  • Double Starburst border $395
  • Partial basket stamped $425
  • Total price for saddle as shown $3770